top of page

publications

2022

Y Song, B Kim, J Park, D Lee*, Probing metal-carboxylate interactions in cellulose nanofibrils-based hydrogels using nonlinear oscillatory rheology,  Carbohydrate Polymers, 300, 120262 (2022)

A Payam*, B Kim, D Lee*, N Bhalla* Unraveling the liquid gliding on vibrating solid liquid interfaces with dynamic nanoslip enactment, Nature Communications, 13(1), 1-8 (2022), *co-corresponding authors

B Kim, B Youn, Y Song, D Lee*, Enhanced dispersion stability and interfacial damping of POSS-functionalized graphene oxide in PDMS nanocomposites, Functional Composites and Structures, 4(3), 035009 (2022)

Y Song, M Kim, H Yi, D Lee*, Nonlinear Rheological Properties of Endothelial Cell Laden-cellulose Nanofibrils Hydrogels, Composites research, 48(2), 1827-1835 (2022)

J Ha, Y Song, N Song, JS Yun, D Lee* Designing an interpenetrating network of silane-functionalized nanocomposites for enhanced particle dispersity and interfacial bonding strength, Ceramics International, 48(2), 1827 (2022)

2021

B Kim, B Youn, Y Song, D Lee*, Enhanced dispersion stability and interfacial damping of POSS-functionalized graphene oxide in PDMS nanocomposites, Functional Composites and Structures, 4(3), 035009 (2022)

Y Song, M Kim, H Yi, D Lee*, Nonlinear Rheological Properties of Endothelial Cell Laden-cellulose Nanofibrils Hydrogels, Composites research, 48(2), 1827-1835 (2022)

J Ha, Y Song, N Song, JS Yun, D Lee* Designing an interpenetrating network of silane-functionalized nanocomposites for enhanced particle dispersity and interfacial bonding strength, Ceramics International, 48(2), 1827 (2022)

SH Ji, D Lee*, JS Yun* Experimental and theoretical investigations of the rheological and electrical behavior of nanocomposites with universal percolation network, Composites Part B: Engineering, 225, 109317 (2021), *co-corresponding authors

Y Ju, J Ha, Y Song, D Lee*, Revealing the enhanced structural recovery and gelation mechanisms of cation-induced cellulose nanofibrils composite hydrogels,j Carbohydrate Polymers, 272, 118515 (2021)

SH Ji, DS Kim, MS Park, D Lee, JS Yun, Development of multicolor 3D-printed 3Y-ZrO2 sintered bodies by optimizing rheological properties of UV-curable high-content ceramic nanocomposites, Materials & Design, 209, 109981 (2021)

S. Pak, S, Kim, D. Lee*, Y. Song*, Micro-Macroscopic coupled modeling for the prediction of synergistic improvement on the thermal conductivity of boron nitride and multi-walled carbon nanotube reinforced composites, Composites Part A, 148, 106474 (2021).  *co-corresponding authors.

D Lee*, A. Q. Shen*, Interfacial tension measurements in microfluidic qausi-static extensional flows, Micromachines, 12(3), 272 (2021), *Equally contributed corresponding authors.

SY Mun, J Ha, S Lee, Y Ju, HM Lim, D Lee*, Prediction of enhanced interfacial bonding strength for basalt fiber/epoxy composites by micromechanical and thermomechanical analyses, Composites Part A, accepted (2021)

H min Kim, S Lee, YS Song, D Lee*, Synergistic improvement of electrical and thermal conductivities of carbon-based nanocomposites and its prediction by Mori-Tanaka scheme with interfacial resistances, Composite Structures, 211, 56-62 (2019)

2020

Y Ju, J Ha, Y Song, JS Yun, D Lee*, Optimizing the printability and dispersibility of functionalized zirconium oxide/acrylate composites with various nano-to micro-particle ratios, Ceramics International, 46(17) 26903 (2020)

S Lee, D Seong, Y Ju, HW Kwak, WS Kim, D Lee*, Revealing the flame retardancy mechanism of highly transparent cellulose nanopapers fabricated by vacuum filtration assisted layer-by-layer deposition, Carbohydrate Polymers, 116628 (2020)

J Cho, H Lee, KH Nam, H Yeo, CM Yang, DG Seong, D Lee*, SY Kim*, Enhanced electrical conductivity of polymer nanocomposite based on edge-selectively functionalized graphene nanoplatelets, Composites Science and Technology, Accepted (2020), *Equally contributed.

J. Park, S. Park, D. Lee, Y. song*, Shape memory polymer composites embedded with hybrid ceramic microparticles, Smart Materials and Structures, 189, 108001 (2020)

2019

H.S. Kim, J.H. Park, K.S. Minn, S.Y. Pak, D. Lee,J.R. Youn, Y.S. Song*, Flame Retardant Composite Foam Modified by Silylated Nanocellulose and Tris(2-chloropropyl) Phosphate, Fibers and Polymers, 20(11), 2280-2288 (2019)

N. Bhalla, A. Jain, Y. Lee, A. Q. Shen*, D. Lee*, Dewetting Metal Nanofilms: Effect of Substrate on Refractive Index Sensitivity of Nanoplasmonic Gold, Nanomaterials, 9(11) 1530 (2019)

TW Lee, S Lee, SM Park, D Lee*, Mechanical, thermomechanical, and local anisotropy analyses of long basalt fiber reinforced polyamide 6 composites, Composite Structures, 222, 110917 (2019)

H Lee, D Lee, J Cho, YO Kim, S Lim, SJ Youn, YC Jung, SY Kim*, DG Seong*, Super-insulating, flame-retardant, and flexible poly (dimethylsiloxane) composites based on silica aerogel, Composites Part A: Applied Science and Manufacturing, 123, 108-113 (2019)

SY Song, MS Park, D Lee, JW Lee, JS Yun*, Optimization and characterization of high-viscosity ZrO2 ceramic nanocomposite resins for supportless stereolithography, Materials & Design, 107960 (2019)

DG Seong, JS Kim, MK Um, D Lee*, Investigation on the Mold Compressive Stage of Compression Resin Transfer Molding by Using In-situ Measurement of Permeability Variation of Fiber Preform, Fibers and Polymers, 20(3), 651-655 (2019)

H min Kim, S Lee, YS Song, D Lee*, Synergistic improvement of electrical and thermal conductivities of carbon-based nanocomposites and its prediction by Mori-Tanaka scheme with interfacial resistances, Composite Structures, 211, 56-62 (2019)

S Lee, H min Kim, DG Seong*, D Lee*, Synergistic improvement of flame retardant properties of expandable graphite and multi-walled carbon nanotube reinforced intumescent polyketone nanocomposites, Carbon, 143, 650-659 (2019)

SH Yang1, DJ Lee1, JR Youn, YS Song, Double-line particle focusing induced by negative normal stress difference in a microfluidic channel, Microfluidics and Nanofluidics, 23 (2), 21 (2019), 1 equally contributed.

2018

D Seong, S Kim, D Lee, J Yi, S Kim, S Kim*, Prediction of Defect Formation during Resin Impregnation Process through a Multi-Layered Fiber Preform in Resin Transfer Molding by a Proposed Analytical Model, Materials, 11 (10), 2055 (2018)

D. Lee*, Local anisotropy analysis based on the Mori-Tanaka model for multiphase composites with fiber length and orientation distributions, Composites Part B: Engineering, 148, 227-234 (2018)

D Lee, YS Song*, Modeling the effects of elastic modulus and thermal expansion coefficient on the shrinkage of glass fiber reinforced composites, Composites Part B: Engineering, 146, 98-105 (2018)

S Pak, S Park, YS Song, D Lee*, Micromechanical and dynamic mechanical analyses for characterizing improved interfacial strength of maleic anhydride compatibilized basalt fiber/polypropylene composites, Composite Structures, 193, 73-79 (2018)

2017

DJ Lee, YS Song*, Thermomechanical anisotropy and flowability of talc and glass fiber reinforced multiphase polymer composites, Composite Structures, 174, 329-337 (2017)

SY Mun, KY Cho, D Lee, HM Lim*, Thermal and electrical properties of SiO2/SiC-epoxy composite by surface oxidation of silicon carbide, Thermochimica Acta 654, 70-73 (2017)

SH Yang, DJ Lee, JR Youn*, YS Song*, Multiple-line particle focusing under viscoelastic flow in a microfluidic device, Analytical Chemistry, 89 (6), 3639-3647 (2017)

D Lee, C Fang, AS Ravan, GG Fuller, AQ Shen*, Temperature controlled tensiometry using droplet microfluidics, Lab on a Chip, 17 (4), 717-726 (2017)

N Bhalla, D Lee, S Sathish, AQ Shen*, Dual-mode refractive index and charge sensing to investigate complex surface chemistry on nanostructures, Nanoscale, 9 (2), 547-554 (2017)

2015

D Lee, SN Beesabathuni, AQ Shen*, Shape-tunable wax microparticle synthesis via microfluidics and droplet impact, Biomicrofluidics, 9 (6), 064114, (2015)

C Fang1, D Lee1, B Stober, GG Fuller, AQ Shen*, Integrated microfluidic platform for instantaneous flow and localized temperature control, RSC Advances, 5 (104), 85620-85629 (2015)   1 Equally contributed.

SH Hwang, DJ Lee, HR Youn, YS Song, JR Youn*, Effects of fiber length distribution on flow property and internal microstructure of an injection molded part, Macromolecular Research, 23 (9), 844-849 (2015)

DJ Lee, SH Hwang, YS Song, JR Youn*, Statistical modeling of effective elastic modulus for multiphased hybrid composites, Polymer Testing, 41, 99-105 (2015)

HR Yun1, DJ Lee1, JR Youn*, YS Song*, Ferrohydrodynamic energy harvesting based on air droplet movement, Nano Energy, 11, 171-178 (2015)   1 Equally contributed.

2013

HJ Oh, DJ Lee, CG Lee, KY Jo, DH Lee, YS Song, JR Youn, Warpage analysis of a micro-molded parts prepared with liquid crystalline polymer based composites, Composites Part A: Applied Science and Manufacturing 53, 34-45 (2013)

DJ Lee, H Brenner, JR Youn, YS Song, Multiplex particle focusing via hydrodynamic force in viscoelastic fluids

Scientific reports 3, 3258 (2013)

2012

DJ Lee, HM Kim, YS Song, JR Youn, Water droplet bouncing and superhydrophobicity induced by multiscale hierarchical nanostructures, 

ACS nano 6 (9), 7656-7664 (2012)

DJ Lee, KY Cho, S Jang, YS Song, JR Youn, Liquid slip on a nanostructured surface, Langmuir 28 (28), 10488-10494 (2012)

김성륜, 김형민, 이두진, 윤재륜, 이성희, 유리섬유가 강화된 필름 삽입 사출품의 섬유배향 및 휨, Journal of the Korean Society for Composite Materials 25 (4), 117-125 (2012)

DJ Lee, H Oh, YS Song, JR Youn, Analysis of effective elastic modulus for multiphased hybrid composites, Composites Science and Technology 72 (2), 278-283 (2012)

2010

MW Kim, SM Hong, D Lee, K Park, TJ Kang, JR Youn, Chain extension effects of para-phenylene diisocyanate on crystallization behavior and biodegradability of poly (lactic acid)/poly (butylene terephthalate) blends, Advanced Composite Materials 19 (4), 331-348 (2010)

DJ Lee, MW Kim, SY Kim, SH Lee, JR Youn, Three dimensional flow simulation and structural analysis on stiffness of fiber reinforced anisotropic parts, Korea-Australia Rheology Journal 22 (2), 95-103 (2010)

bottom of page